Evidenziare:
50Hz Natural Gas Industrial Combustion System With Burners for Raw Material Melting
50Hz Heavy oil Industrial Combustion System With Burners for Raw Material Melting
1. Brief introduction
A furnace combustion system is an industrial apparatus designed for controlled burning of fuels (such as gas, oil, or solid materials) to generate heat for processes like material heating or melting, primarily through direct or indirect flame interaction. It achieves high thermal efficiency by optimizing fuel-air mixing and heat transfer mechanisms.
The process of reaction is the oxidation reaction between fuel and combustion air, which will be finished instantaneously. The other two processes take a longer time. The fuel process and flame characteristic are determined by the mixing process, which is also determined by the temperature distribution and process requirement of the furnace.
No matter gas combustion or oil combustion, when the fuel goes into the combustion room, the fuel combustion process can be divided into three basic ones:
- Fuel mixes with combustion air.
- The temperature of mixture of fuel and combustion air raises up to ignition point.
- The mixture of fuel and combustion air begin to fire.
2. Types of conbustion System
| Item |
Description |
| 1 |
Internal combustion engine |
| 2 |
External combustion system |
| 3 |
Oxy-fuel combustion |
| 4 |
Chemical looping combustion |
3. Combustion air system
Regenerator is widely used to preheat the combustion air. It is high efficiency to recovery the waste heat, the combustion air can be preheated to 1200~1350°C. Furnace combustion air system is including:
| Item |
Description |
| 1 |
Regenerator |
| 2 |
Manual valve |
| 3 |
Combustion air blower / Combustion fan |
4. Double deck reversing unit
Double deck reversing unit is including:
| NO. |
Description |
| 1 |
Actuator |
| 2 |
Slide Valve |
| 3 |
Damper |
FAQ
Q: Who we are?
A: JEFFER Engineering and Technology Co., Ltd is a professional engineering company specialising in project design, engineering technology consulting, engineering, procurement, construction (EPC), and project operation management.
Q: Can you offer design service?
A: Yes, we could design full solution drawings as per your requirements.
Q: Do you offer installation on site overseas?
A:Yes, we can provide our engineer to supervise the installation work on site or provide the the whole installation team on site to finish the project.
Q: How can I get the price?
A: For product line, please provide the detailed specfication of the production you want to product, then we will privode an economic plan for your reference. For engineering service, please provide your requirement, we will provide the detailed schedule and plan for your reference.
Il tuo messaggio deve contenere da 20 a 3000 caratteri!
